Joseph Assaad, Yehia Daou
Use of the equivalent mortar phase to assess thixotropy of fresh SCC - Prediction of interfacial bond strength between successive placement lifts
Appl. Rheol. 26:4 (2016) 42759 (10 pages)Abstract: Self-consolidating concrete (SCC) is very sensitive to delays or stoppages between successive lifts during casting, especially given that vibration is prohibited with this highly flowable type of concrete. The investigation reported in this paper seeks to quantify the effect of mixture proportioning on thixotropy along with the resulting effect on interfacial bond strength of hardened material that could result from successive lifts. The suitability of the equivalent mortar phase to simplify testing protocols and appropriately predict SCC properties was given particular attention; the concrete-equivalent-mortar (CEM) mixtures are derived from SCC by eliminating the coarse aggregate fraction and replacing it by an equivalent quantity of sand having equal surface area. Tests results have shown that SCC and CEM mixtures prepared with combinations of increased cement content, silica fume, and/or viscosity-modifier led to higher levels of thixotropy. Yet, the responses determined using SCC were higher by around 1.6 times than those of CEM, given the differences in unit weight and air content between both materials. Good correlations are established between thixotropy and interfacial bond strengths of SCC and CEM mixtures. Key words: © 2016 Applied Rheology.
DOI 10.3933/ApplRheol-26-42759
-- full text PDF
available for subscribers --
-- open access PDF extractavailable for non-subscribers --
You have no password-free access to Applied Rheology Online. If you are a subscriber, enter login details below. For password-free access, we need your IP address. Sample manuscripts for free download can be found here ►
Forgotten your login details? Send an email with subject "AR login" to login@appliedrheology.org
Purchase this article for 20 € ? ►
Appl Rheol 26 (2016) issues:
© Applied Rheology 2018